¿Prefiere español? Ver esta página en español

Gutter Repair for Leaks, Sags and Loose Downspouts

Leaking corners resealed, sagging runs re-hung, downspouts reattached and damaged sections replaced. Serving the Valley, Santa Clarita and the Conejo hills.

Gutter Spa Club repairs gutters and downspouts on homes across the San Fernando, Santa Clarita and Conejo valleys. We reseal leaking corners and end caps, re-hang sagging runs, replace hangers, reattach downspouts and replace damaged sections. When a whole system is worn out, we replace it with new seamless gutters. Call (818) 913-1626 Monday through Saturday, 7am to 7pm, or request an estimate.

What gutter repairs do you do?

What you seeThe repair
A drip or stain below a corner or end capOld sealant cleaned out, joint resealed
A belly between two hangers, often holding waterSection re-hung with new hangers
Daylight between the gutter and the fascia boardFasteners reset where the fascia is sound
Water still sitting in the gutter days after rainRun re-pitched toward the downspout
A hole or a drip through the bottom in one spotPatched
A downspout loose at an elbow, off the wall, or crushed at the bottomReattached, re-strapped, or the damaged piece replaced
A dented, split or corroded length of gutterThat section replaced
Ritchie on a ladder at a tile roof, fastening a gutter with a cordless drill
Ritchie re-fastening a gutter on a tile-roof home.

A few notes from doing this every day.

Sags usually start with weight. Wet debris sits between two hangers, the hanger pulls out of the fascia, water pools, and the next hanger goes. Older homes in Van Nuys and North Hollywood often have spike-and-ferrule hangers every three or four feet. Modern hidden hangers go every two feet or closer, and re-hanging the whole run with new ones is often worth it when the metal is still good.

A gutter should fall about a quarter inch every ten feet toward the outlet. Runs lose that pitch when hangers loosen, when a roofer takes the gutters down and puts them back without re-leveling, or when the house settles.

If the fascia behind a loose gutter is soft from years of overflow, it won’t hold a screw. The wood has to be repaired before the gutter goes back up, and we’ll show you what we found.

Copper gutters, which some hillside homes in Calabasas and Woodland Hills have, don’t get replaced. They get resealed and re-hung.

Should I repair or replace?

It mostly comes down to how much of the house has the problem.

SignUsually a repairUsually a replacement
SaggingOne or two sectionsMost of a run, or spike hangers every few feet
Leaking jointsOne corner or end capEvery corner, or sectional seams every ten feet
Pulled from fasciaFastener reset, fascia soundFascia rotted along the run
Rust or holesOne patchable spotRust or pitting along the run
Standing waterOne section re-pitchedWhole system re-hung, and the metal is tired
OverflowingClogged, fixed by a cleaningOverflows when clean, undersized for the roof
AgeAluminum under 15 yearsSteel or sectional past 20, or vinyl

Gutters that overflow when they’re clean are a sizing problem. It shows up on tile-roof homes where long valleys push a lot of water into one section, and on big roofs with too few downspouts. Adding a downspout or going from five-inch to six-inch gutter is the fix. Gutter styles and sizing explains the difference, and signs your gutters need repair shows what each problem looks like from the ground.

What if the gutters need to be replaced?

We replace them with seamless gutters. The options are aluminum in five and six inch K-style and half-round, plus copper, with matching downspouts, leader heads and rain chains in a range of colors. Seamless gutters are run on site from a coil and have joints only at the corners, so the leak-every-ten-feet problem of sectional gutters goes away.

Profiles, downspouts and colors are on our products page, and you can request an installation estimate there.

How do you find the problem?

Every gutter cleaning includes a look at hangers, seams, pitch and downspouts. If we see a pulled hanger or a loose downspout strap, we’ll usually reset it while we’re up there. If we see something bigger, we tell you what we found and what it’ll take.

You don’t need a cleaning to get a repair looked at. If something is dripping, sagging or hanging loose, send us a note with what you’re seeing.

Members on the recurring plans get this inspection on every visit, which is how small problems stay small.

What don’t you repair?

Underground drain lines. Where a downspout ties into a buried pipe, we test the flow and tell you where it’s blocked, and a drain plumber clears or replaces the line. Our downspout guide explains how to tell if the problem is below grade.

How much does gutter repair cost?

Small fixes found during a cleaning, like resetting a strap or re-screwing a hanger, are usually minor. Anything bigger, like replacing a section or re-pitching a run, is priced on its own before we do it.

Repairs come before gutter guards. A guard never goes on over a problem gutter.

The estimate is free. Request one here.

What Homeowners Say

4.9 average rating across Google and Yelp, 127 reviews

Read reviews on Google Read reviews on Yelp

Gutter Repair FAQs

We reseal leaking corners and end caps, re-hang sagging sections, replace hangers, correct the pitch on runs that hold water, patch single holes, reattach and re-strap downspouts, and replace damaged gutter or downspout sections.

Usually, if the metal is sound. One sag is a re-hang. A whole run that sags is often re-hung with new hidden hangers spaced every two feet or closer.

The old sealant is cleaned out and the joint is resealed. Gutter sealant dries out in the sun here, so a dripping corner or end cap on an otherwise sound gutter is a small repair.

When the problem is across most of the house: sag along most of a run, every corner leaking, rust or pitting along the run, sectional seams leaking every ten feet, or gutters that overflow when they're clean.

Yes. Full replacements and new installs are seamless aluminum in five and six inch K-style or half-round, or copper, with matching downspouts.

Where We Offer Gutter Repair

Conejo Valley: Agoura Hills, Lake Sherwood, Newbury Park, Oak Park, Thousand Oaks, Westlake Village

San Fernando Valley: Arleta, Burbank, Chatsworth, Deer Lake Highlands, Encino, Granada Hills, Lake Balboa, Lake View Terrace, Mission Hills, North Hollywood, Northridge, Pacoima, Panorama City, Porter Ranch, Reseda, San Fernando, Sherman Oaks, Studio City, Sun Valley, Sunland, Sylmar, Tarzana, Toluca Lake, Tujunga, Valley Glen, Van Nuys, Winnetka, Woodland Hills

Santa Clarita Valley: Canyon Country, Castaic, Newhall, Santa Clarita, Saugus, Stevenson Ranch, Valencia

Santa Monica Mountains: Calabasas, Hidden Hills, Malibu, Mulholland Drive, Topanga Canyon

Simi Valley and Moorpark: Bell Canyon, Moorpark, Simi Valley

Get a free gutter repair estimate

Tell us about your home and we'll get back to you within 24 hours.

Please select at least one service.
Please provide your full name.
Please provide a valid 10-digit phone number.
Please provide a valid email address.
Please provide your address.

Business Hours

Monday - Saturday: 7:00 AM - 7:00 PM

Closed on Sundays

Gutter products & installation

Beyond cleaning, we can help you explore gutter styles, downspouts, leader heads, accessories, and color choices. When you are ready for new gutters or a professional installation, visit our products page to see what we offer and request an install estimate tailored to your home.

View products & installation options